Δοκιμές & επιθεώρηση
TÜV AUSTRIA Websites > Stage GR > Solution > Βιομηχανία > Procedure qualification – pressure equipment Λύση: Procedure qualification – pressure equipment Δοκιμές & επιθεώρηση Solution: Procedure qualification – pressure equipment Dipl.-Ing. Gerhard Höltmann Dipl.-Ing. Gerhard Höltmann Deutschstraße 10 1230 Wien Österreich +43 5 0454 6100 Αποστολή email Deutschstraße 10 1230 Wien Österreich Save to My Bundle Dipl.-Ing. Gerhard Höltmann Save to My Bundle Save to My Bundle Save to My Bundle Διαπίστευση Όλες οι διαπιστεύσεις "TÜV AUSTRIA carries out procedure qualification tests for pressure equipment according to harmonised standards, such as ÖNORM EN ISO 15614." Procedure qualification - pressure equipment Procedure qualification The working processes for the production of permanent material connections, i.e. welded and brazed joints, must be approved by a recognised independent testing body or a notified body for pressure equipment of category II or higher. Procedure qualification - pressure equipment For such approval, TÜV AUSTRIA carries out tests according to harmonised standards, such as the ÖNORM EN ISO 15614 series, or equivalent tests. As a Notified Body, TÜV AUSTRIA has an accredited test laboratory to perform these procedure qualification tests, including destructive and non-destructive testing of the test pieces. Περισσότερες ετικέτες Marketing Notifizierte Stelle Welded joint DT Destructive testing Manufacturer Material compound Category II Procedure Solder connection ÖNORM EN ISO 15614 NOBO Notified Body Non-destructive testing (NDT)Pressure equipment Industry Σχετικές λύσεις από τον ίδιο τομέα Βιομηχανία ADR/RID Βιομηχανία περισσότερα Save to my Bundle Legal register & environmental law register Βιομηχανία περισσότερα Save to my Bundle ASME Βιομηχανία περισσότερα Save to my Bundle Electrical plants Βιομηχανία περισσότερα Save to my Bundle Όλες οι λύσεις Ανακαλύψτε περισσότερους τομείς: Μεταφορές & Κυκλοφορία Ενέργεια Υγεία & Ιατρική Επιστήμη & Έρευνα Αθλητισμός & Γυμναστική Αναψυχή & Ψυχαγωγία Ηλεκτρονική Κατασκευές & Ακίνητα Πληροφορική & Ασφάλεια Πιστοποίηση Αυτοκίνητο Τρόφιμα Τουρισμός Γεωργία Εμπόριο Βιωσιμότητα Τεχνολογία Επικοινωνιών Μηχανήματα Δήμοι Gerhard Höltmann +43 5 0454 6100 \| gerhard.hoeltmann@tuv.at
Gerhard Höltmann +43 5 0454 6100 \| gerhard.hoeltmann@tuv.at

TÜV AUSTRIA Websites > Stage GR > Solution > Βιομηχανία > Procedure qualification – pressure equipment

Λύση: Procedure qualification – pressure equipment

Δοκιμές & επιθεώρηση

Solution: Procedure qualification – pressure equipment

Dipl.-Ing. Gerhard Höltmann

Deutschstraße 10 1230 Wien Österreich

+43 5 0454 6100

Αποστολή email

Διαπίστευση

Όλες οι διαπιστεύσεις

"TÜV AUSTRIA carries out procedure qualification tests for pressure equipment according to harmonised standards, such as ÖNORM EN ISO 15614."

Procedure qualification - pressure equipment

Procedure qualification

The working processes for the production of permanent material connections, i.e. welded and brazed joints, must be approved by a recognised independent testing body or a notified body for pressure equipment of category II or higher.

Procedure qualification - pressure equipment

For such approval, TÜV AUSTRIA carries out tests according to harmonised standards, such as the ÖNORM EN ISO 15614 series, or equivalent tests.

As a Notified Body, TÜV AUSTRIA has an accredited test laboratory to perform these procedure qualification tests, including destructive and non-destructive testing of the test pieces.